Product Code:SAE J1890
Title:Performance Assurance of Remanufactured, Hydraulically-Operated Rack and Pinion Steering Gears
Issuing Committee:Service Committee
Scope:In order to insure that the remanufactured and/or rebuilt steering gear has and maintains the reliability and performance associated with a new OEM steering gear, it is essential that the following procedures be followed; if in-house engineering capabilities are limited, it may be necessary to consult with an outside laboratory to insure all testing methods used meet with the requirements outlined in this paper.
基本信息
标准名称: | 电缆和光缆在火焰条件下的燃烧试验 第12部分:单根绝缘电线电缆火焰垂直蔓延试验 1kW预混合型火焰试验方法 |
英文名称: | Test on electric and optical fibre cables under fire conditions - Part 12:Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1kW pre-mixed flame |
中标分类: |
电工 >>
电工材料和通用零件 >>
电缆及其附件 |
ICS分类: |
电气工程 >>
电线和电缆 >>
电缆
|
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2008-06-26 |
实施日期: | 2009-04-01 |
首发日期: | 2008-06-26 |
作废日期: | |
主管部门: | 全国电线电缆标准化技术委员会 |
提出单位: | 中国电器工业协会 |
归口单位: | 全国电线电缆标准化技术委员会 |
起草单位: | 上海电缆研究所、天津金山电线电缆股份公司等 |
起草人: | 龚国祥、肖继东、郑国俊、唐崇健、曲巍、鲁邦秀、胡光政 |
出版社: | 中国标准出版社 |
出版日期: | 2009-04-01 |
页数: | 9页 |
计划单号: | 20073937-T-604 |
适用范围
GB/T 18380《电缆和光缆在火焰条件下的燃烧试验》分为11个部分,本部分为GB/T 18380的第12部分。
本部分规定了在火焰条件下,单根电线电缆或光缆火焰垂直蔓延试验。试验装置在GB/T 18380.11中规定。
本部分规定了1kW预混和型火焰的常规用法。
前言
没有内容
目录
没有内容
引用标准
下列文件中的条款通过GB/T18380的本部分的引用而成为本部分的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本部分,然而,鼓励根据本部分达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本部分。
GB/T16499-1996 编制电气安全标准的导则(eqvIECGuide104:1984)
GB/T18380.11-2008 电缆和光缆在火焰条件下的燃烧试验 第11部分:单根绝缘电线电缆火焰垂直蔓延试验 试验装置(IEC60332-1-1:2004,IDT)
IEC60695-4:1993 着火危险试验 第4部分:着火试验术语
所属分类: 电工 电工材料和通用零件 电缆及其附件 电气工程 电线和电缆 电缆